Other forging eq. - Page No. 1 (alphabetical)
© 2020 SFC Swiss Forging Consultants GmbH powered by vikkiv-vision.com
1
PAGE
2 3
Press capacity: 25 t Stroke: 150 mm Daylight: 870 mm Table size (left to right): 450 mm Table size (front to back): 400 mm Table displacement: 0 mm Ram (left to right): 100 mm Ram (front to back): 100 mm Return speed: 110 mm/sec Dimensions: 1000 x 1050 x 2200 mm (LxBxH) Driving power overall: 3 / 380 / 50 kW / V / Hz Lower ejector: 0 Upper ejector: 0 Working pressure: 200 bar Oil quantity: 150 l Height of machine above floor: 2200 mm Total weight: 1,55 t
Shearing capacity: 80 t Standard cutting length: 0 - 300 mm Cutting temperature min./max.: 950 / 1250 °C Smallest diameter of bar: 30 x 30 mm Driving power: 30 kW Mode of operation: oil hydraulic Total weight: 5 t Required air per hour: 200 l Required water consumption per hour: 2 m³ Shearing capacity at 800N/mm² square/round: 80/80 mm
Ultimate load 800 kg Load moment 1000 mkg Tongs opening round 50 - 230 mm Tongs opening square 50 - 230 mm Driving power 11 kW Dimensions 3900 x 1800 x 2100 mm (B x T x H) Total weight 5,3 t Speed 0 - 90 m/min Speed of tong 2 – 35 / min Altitude of tong 600 - 1000 mm Stroke 500 mm Average lifting height 600 mm Year of manufacturing 1983 Mode of operation electro-hydraulic Comment wheel type
Ultimate load 400 kg Load moment 800 mkg Stroke of tongs 400 mm Dimensions 4000 x 1600 x 2400 mm (B x T x H) Total weight 7 t Mode of operation electro-hydraulic Comment wheel type
Ultimate load 500 kg Load moment 1000 mkg Dimensions 3900 x 1800 x 2400 Mm (B x T x H) Total weight 7 t Year of manufacturing 1970 Mode of operation electro-hydraulic Comment wheel type
1
PAGE
2 3
1. Allpress DEP 250 (mech. Presse) (Z000540) 2. Andromat 220-S T2 (Z000150) 3. Behringer HBP 360 A (Z000350) 4. Dango & Dienenthal AMP 1000 (Z000547) 5. Dango Dienentahl A 5.1 (Z000396) 6. Dango Dienentahl AMP 400 (Z000395) 7. Dango Dienentahl AMP 500 (Z000399) 8. EFD 100 kW (Z000514) 9. Eitel RP 25 (Z000154) 10. FICEP CTCH 80 (Z000166) 11. Glama GSM 32/64 (Z000541) 12. Hasenclever VHG 150/1100/1300 (Z000444) 13. Hasenclever HG 315 (Z000341)
Ultimate load 0,1 t rail bounded Speed 30 m / min Driving power 15 / 380 / 50 kW / V / Hz Dimensions 2450 x 3750 x 2800 mm (B x T x H) Total weight 5,5 t Mode of operation electrical
Saw type band Diameter of piece max. 360 mm Length of cut 600 mm Driving power 5,5 kW Dimensions 2450 x 3000 x 2050 mm Total weight ~ 2,5 t Year of manufacturing 1995 Comment conveyor included
Capacity 100 kW Diameter of work piece 10 - 38 mm Length of work piece max. 100 mm Dimensions 2200 x 2150 x 1650 Mm (B x T x H) Total weight 1 t
FICEP CTCH 80 (Z000166)
Dango Dienentahl A 5.1 (Z000396)
Dango Dienentahl AMP 400 (Z000395)
Dango Dienentahl AMP 500 (Z000399)
Eitel RP 25 (Z000154)
Andromat 220-S T2 (Z000150)
Behringer HBP 360 A (Z000350)
FICEP CTCH 80 Dango Dienentahl A 5.1 Dango Dienentahl A 5.1 Dango Dienentahl AMP 400 Dango Dienentahl AMP 400 Dango Dienentahl AMP 500 Dango Dienentahl AMP 500 Eitel RP 25 Behringer HBP 360 A Andromat 220-S T2
No Image
EFD 100 kW (Z000514)
Press capacity 250 t Drive capacity 18,5 kW Stroke 200 mm Stroke rate 56 min^-1 Shut height 530 mm Table size (left to right) 1290 mm Table size (front to back) 1005 mm Ram (left to right) 1090 mm Ram (front to back) 800 mm Ram adjustment 125 mm Side window 360 x 570 mm Dimensions 4700 x 200 x 2000 mm (L x B x H) Total weight 22,8 t
Allpress DEP 250 (Z000540)
Allpress DEP 250
Ultimate load 1000 kg Load moment 2400 mkg Speed 0-90 m / min Driving power 22 kW / V / Hz Dimensions 5600 x 2400 x 2300 mm (L x B x H) Total weight 10 t Mode of operation oil-hydraulic Year of manufacturing 1973 Comment wheel type
Dango & Dienenthal AMP 1000 (Z000547)
Dango & Dienenthal AMP 1000
Glama GSM 32/64 (Z000541)
Ultimate load 3.200 kg Load moment 6.400 mkg railbound Speedmax. 50 m / min Driving power 90 kW Tongs opening (round) 197 - 675 mm Tongs opening (square) 197 - 595 mm Max. rotation of the tongs 1300 mm Height of tongs above flor parallel 750 - 1350 mm Tipping angle of the tongs 12,5 ° Lateral displacement from left to right 300 mm Dimensions 6700 x 3000 x 2650 mm (L x B x H) Total weight ca. 28 t Mode of operation electric
Glama GSM 32/64
Electric supply capacity: 315 kvA Upsetting force: 63 t Driving power: 37 kW Upsetting stroke: max. 710 mm Minimum permissible bar diameter: 25 mm Perfectly suitable for bar diameter: 36-71 mm Length of bar: max. 2100 mm Capacity: max. 560 kg/h
Hasenclever HG 315 (Z000341)
Hasenclever HG 315
Electric supply capacity 150 kvA Upsetting power 25 t Usable upsetting stroke 1100 mm Start diameter of work piece 16 - 55 mm Max bar length 1300 mm Driving power 22 kW Dimensions 3200 x 2400 x 2200 mm Total weight 6,8 t
Hasenclever VHG 150/1100/1300Hasenclever HG 315
Hasenclever VHG 150/1100/1300 (Z000444)
© 2020 SFC Swiss Forging Consultants GmbH
Other forging eq. (alphabetical) Page No. 1
Ultimate load 800 kg Load moment 1.000 mkg Tongs opening round 50 - 230 mm Tongs opening square 50 - 230 mm Driving power 11 kW Total weight 5,3 t Speed 0 - 90 m/min Speed of tong 2 – 35 / min Altitude of tong 600-1000 mm Stroke 500 mm Average lifting height 600 mm Year of manufacturing 1983 Mode of operation electro-hydraulic Comment wheel type
Ultimate load 400 kg Load moment 800 mkg Stroke of tongs 400 mm Total weight 7 t Mode of operation electro-hydraulic Comment wheel type
Press capacity: 25 t Stroke: 150 mm Daylight: 870 mm Table size (left to right): 450 mm Table size (front to back): 400 mm Table displacement: 0 mm Ram (left to right): 100 mm Ram (front to back): 100 mm Return speed: 110 mm/sec Lower ejector: 0 Upper ejector: 0 Working pressure: 200 bar Oil quantity: 150 l Height of machine above floor: 2200 mm Total weight: 1,55 t
Shearing capacity: 80 t Standard cutting length: 0 - 300 mm Cutting temperature min./max.: 950 / 1250 °C Smallest diameter of bar: 30 x 30 mm Driving power: 30 kW Mode of operation: oil hydraulic Total weight: 5 t Required air per hour: 200 l Required water consum. per hour: 2 m³ Shearing capacity at 800N/mm² square/round: 80/80 mm
1
PAGE
2 3
1
PAGE
2 3
Ultimate load 0,1 t rail bounded Speed 30 m / min Total weight 5,5 t Mode of operation electrical
Saw type band Diameter of piece max. 360 mm Length of cut 600 mm Driving power 5,5 kW Total weight ~ 2,5 t Year of manufacturing 1995 Comment conveyor included
Capacity 100 kW Diameter of work piece 10 - 38 mm Length of work piece max. 100 mm Total weight 1 t
Dango Dienentahl A 5.1 (Z000396)
Dango Dienentahl A 5.1
Dango Dienentahl AMP 400 (Z000395)
Dango Dienentahl AMP 400
Dango Dienentahl AMP 500 (Z000399)
Dango Dienentahl AMP 500
Eitel RP 25 (Z000154)
Eitel RP 25
FICEP CTCH 80 (Z000166)
FICEP CTCH 80
Andromat 220-S T2 (Z000150)
Behringer HBP 360 A (Z000350)
EFD 100 kW (Z000514)
Andromat 220-S T2 Behringer HBP 360 A
No Image
Traglast 500 kg Lastmoment 1.000 mkg Gesamtgewicht 7 t Total weight 7 t Baujahr 1970 Arbeitsweise elektro-hydraulisch Kommentar frei verfahrbar
1. Allpress DEP 250 (mech. Presse) (Z000540) 2. Andromat 220-S T2 (Z000150) 3. Behringer HBP 360 A (Z000350) 4. Dango & Dienenthal AMP 1000 (Z000547) 5. Dango Dienentahl A 5.1 (Z000396) 6. Dango Dienentahl AMP 400 (Z000395) 7. Dango Dienentahl AMP 500 (Z000399) 8. EFD 100 kW (Z000514) 9. Eitel RP 25 (Z000154) 10. FICEP CTCH 80 (Z000166) 11. Glama GSM 32/64 (Z000541) 12. Hasenclever VHG 150/1100/1300 (Z000444) 13. Hasenclever HG 315 (Z000341)
Allpress DEP 250 (Z000540)
Press capacity 250 t Drive capacity 18,5 kW Stroke 200 mm Stroke rate 56 min^-1 Shut height 530 mm Table size (left to right) 1290 mm Table size (front to back) 1005 mm Ram (left to right) 1090 mm Ram (front to back) 800 mm Ram adjustment 125 mm Total weight 22,8 t
Allpress DEP 250
Ultimate load 1000 kg Load moment 2400 mkg Speed 0-90 m / min Driving power 22 kW / V / Hz Total weight 10 t Mode of operation oil-hydraulic Year of manufacturing 1973 Comment wheel type
Dango & Dienenthal AMP 1000 (Z000547)
Dango & Dienenthal AMP 1000
Glama GSM 32/64 (Z000541)
Dango Dienentahl AMP 500
Hasenclever VHG 150/1100/1300 (Z000444)
Electric supply capacity 150 kvA Upsetting power 25 t Usable upsetting stroke 1100 mm Start diameter of work piece 16 - 55 mm Max bar length 1300 mm Driving power 22 kW Total weight 6,8 t
Hasenclever VHG 150/1100/1300
Electric supply capacity: 315 kvA Upsetting force: 63 t Driving power: 37 kW Upsetting stroke: max. 710 mm Minimum permis. bar diameter: 25 mm Perfectly suitable f. bar diameter: 36-71 mm Length of bar: max. 2100 mm Capacity: max. 560 kg/h
Hasenclever HG 315
Hasenclever HG 315 (Z000341)
Ultimate load 3.200 kg Load moment 6.400 mkg railbound Speedmax. 50 m / min Driving power 90 kW Tongs opening (round) 197 - 675 mm Tongs opening (square) 197 - 595 mm Max. rotation of the tongs 1300 mm Height of tongs above flor parallel 750 - 1350 mm Tipping angle of the tongs 12,5 ° Lateral displacement from l. to r. 300 mm Total weight ca. 28 t Mode of operation electric
Services around the forging industry
Phone: +41 / 41 612 02 02
Services around the forging industry
Phone: +41 / 41 612 02 02